48680A
1.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
Using SST, compress the coil spring.
Be careful as the coil spring may spring upward and cause an injury.
Make sure that the suspension support is free from the coil spring.
Do not compress the coil spring more than necessary.
Do not use an impact wrench. It will damage SST.
Remove the front support to front shock absorber nut.
48609
2.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH
Remove the suspension support, cushion and 2 retainers from the shock absorber rod.
48132
3.REMOVE FRONT COIL SPRING LH
Remove the coil spring from the shock absorber.
48510H
4.REMOVE FRONT SHOCK ABSORBER BUSH
Using SST and a press, remove the absorber bush.