Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM
RM1440E _53 Suspension _056139 FRONT SUSPENSION _0273984 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  DISASSEMBLY  


PROCEDURE

Hide 48654F 1.REMOVE FRONT NO. 1 LOWER ARM BUSH LH

a.
G020164

Using a chisel and hammer, pry the flange of the bush outward.


b.
G020412E06
1.177,1.583 1.385,1.854 1.385,1.854 1.531,1.854 false 1.542,0.302 1.375,0.302 1.375,0.302 1.146,0.542 false 1.375,0.302 1.125,0.802 false 1.583,0.219 1.927,0.448 0.344,0.229 10 false SST 1.594,1.781 1.958,1.969 0.365,0.188 10 false SST

Using SST and a press, press out the bush.

SST
09632-36010  
09950-00020  
09950-60010  (09951-00400)


Hide 48655E 2.REMOVE FRONT NO. 2 LOWER ARM BUSH LH

a.
G020164

Using a chisel and hammer, pry the flange of the bush outward.


b.
G020413E07
1.479,0.156 1.302,0.156 1.302,0.156 1.135,0.438 false 1.313,0.156 1.115,0.708 false 1.563,1.802 1.375,1.802 1.375,1.802 1.229,1.552 false 1.531,0.083 1.865,0.323 0.333,0.24 10 true SST 1.615,1.729 1.969,1.948 0.354,0.219 10 false SST

Using SST and a press, press out the bush.

SST
09632-36010  
09950-00020  
09950-60010  (09951-00400)


Hide 43345E 3.REMOVE LOWER BALL JOINT DUST COVER LH

a.
C214807

Using a snap ring expander, remove the dust cover set ring and dust cover from the lower arm.

NOTICE:
·

Do not damage the ball joint dust cover.

·

If the ball joint dust cover is damaged, replace it.