Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM1440E _53 Suspension _056140 REAR SUSPENSION _0273992 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48812 1.INSTALL REAR STABILIZER BAR

a.
D028261

Install the 2 stabilizer bushes to the stabilizer bar.

HINT:

Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.


Text in Illustration
V100136

Outer Side


b.

Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 48840A 2.INSTALL REAR STABILIZER LINK ASSEMBLY LH

a.

Install the stabilizer link with a new nut.

Torque:
70 N*m (714 kgf*cm, 52 ft.*lbf)

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.



b.

Install the 2 retainers and cushion to the stabilizer link.


c.

Hold the stabilizer bar link with a wrench, and then install the retainer, cushion and link with a new nut.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)


Hide 48830D 3.INSTALL REAR STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 4.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)