Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM1440E _53 Suspension _056140 REAR SUSPENSION _0273992 REAR STABILIZER BAR G

REAR SUSPENSION  REAR STABILIZER BAR  INSPECTION  


PROCEDURE

Hide 48830 1.INSPECT REAR STABILIZER LINK ASSEMBLY

a.
D028478

As shown in the illustration, flip the ball joint stud back and forth 5 times.


b.

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the 5th turn.

Standard turning torque:

0.05 to 1.96 N*m (0.51 to 20 kgf*cm, 0.44 to 17.3 in.*lbf)