Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM1440E _53 Suspension _056140 REAR SUSPENSION _0273992 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 48840A 2.REMOVE REAR STABILIZER LINK ASSEMBLY LH

a.
D028258

Remove the nut and disconnect the stabilizer bar from the stabilizer link.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.



b.
D028259

Hold the stabilizer bar link with a wrench and remove the nut, retainer, cushion and link.


c.

Remove the 2 retainers and cushion from the stabilizer link.


Hide 48830D 3.REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 48812 4.REMOVE REAR STABILIZER BAR

a.
D028260

Remove the 4 bolts, 2 stabilizer brackets and stabilizer bar.


b.

Remove the 2 stabilizer bushes from the stabilizer bar.