Home › Brake › BRAKE (REAR) › REAR BRAKE
RM1440E _54 Brake _056145 BRAKE (REAR) _0274013 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL PISTON SEAL

a.
C191824E03
0.469,2.781 0.646,2.958 0.177,0.177 10 false *1

Apply a light coat of lithium soap base glycol grease to a new piston seal.

Text in Illustration
*1 Lithium soap base glycol grease


b.

Install the piston seal to the rear disc brake cylinder.


Hide 2.INSTALL CYLINDER BOOT

a.
C191825E03
0.74,4.156 0.917,4.344 0.177,0.188 10 false *1

Apply a light coat of lithium soap base glycol grease to the entire inner circumference of a new cylinder boot.

Text in Illustration
*1 Lithium soap base glycol grease


b.

Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.


c.

Install the cylinder boot to the rear disc brake piston.


d.

Install the rear disc brake piston to the rear disc brake cylinder.

NOTICE:

Do not forcibly install the piston into the disc brake cylinder.



Hide 3.INSTALL REAR DISC BRAKE PISTON

a.

Install the cylinder boot to the rear disc brake cylinder.

NOTICE:

Install the boot securely to the groove of the disc brake cylinder.



b.
C191826

Push in the rear disc brake piston by hand and install the cylinder boot into the groove of the rear disc brake piston.

NOTICE:

Install the boot securely to the groove of the piston.



Hide 47547C 4.TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG

a.

Temporarily install the bleeder plug to the rear disc brake cylinder.

HINT:

The bleeder plug will be tightened to the torque specification in the "Bleed Brake Line" procedure.



Hide 31478C 5.INSTALL REAR DISC BRAKE BLEEDER PLUG CAP