Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM1440E _54 Brake _056146 PARKING BRAKE _0274018 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C217121

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Switch Condition Specified Condition
Switch connector - Switch body On (Shaft is not pressed) Below 1 Ω
Off (Shaft is pressed) 10 kΩ or higher


Text in Illustration
V100135

On
V100136

Off

If the result is not as specified, replace the parking brake switch assembly.