Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP
RM1440E _55 Steering _056147 POWER ASSIST SYSTEMS _0274020 VANE PUMP A

POWER ASSIST SYSTEMS  VANE PUMP  DISASSEMBLY  


PROCEDURE

Hide 44310 1.SECURE VANE PUMP ASSEMBLY

a.
C215464E03
1.677,1.854 2.24,1.229 2.24,1.229 2.469,1.229 true 2.51,1.146 2.906,1.302 0.396,0.156 10 false SST

Using SST, secure the vane pump in a vise.

SST
09630-00014  (09631-00132)


Hide 2.REMOVE SUCTION PORT UNION

a.
C215465

Remove the bolt and suction port union from the vane pump.


b.

Using a screwdriver, remove the O-ring from the suction port union.


Hide 3.REMOVE VANE PUMP REAR HOUSING

a.
C131230

Remove the 4 bolts and vane pump rear housing from the vane pump front housing.


b.
U115750

Using a screwdriver, remove the O-ring from the vane pump rear housing.


Hide 4.REMOVE VANE PUMP SHAFT WITH PULLEY

a.
C131231

Using 2 screwdrivers, remove the snap ring from the vane pump shaft.


b.

Remove the vane pump shaft with pulley.

NOTICE:

Be careful not to drop or damage the vane pump shaft with vane pump pulley.


If it is damaged, replace the vane pump assembly.


Hide 5.REMOVE VANE PUMP ROTOR

C114697

a.

Remove the 10 vane pump plates.

NOTICE:

Take care not to drop the vane pump plate.



b.

Remove the vane pump rotor from the vane pump front housing.


Hide 6.REMOVE VANE PUMP CAM RING

C114698

a.

Remove the cam ring from the vane pump front housing.


Hide 7.REMOVE VANE PUMP FRONT SIDE PLATE

a.
C114699

Remove the front side plate from the vane pump front housing.


b.
U115751

Using a screwdriver, remove the O-ring from the front side plate.


c.
C114700

Remove the O-ring from the vane pump front housing.


Hide 8.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C114701E03
2.323,0.127 2.697,0.288 0.373,0.161 10 *a 2.272,0.219 2.157,0.219 2.157,0.219 1.992,0.575 false

Using a screwdriver and piece of cloth, pry out the oil seal.

Text in Illustration
*a Cloth

NOTICE:

Be careful not to damage the vane pump front housing.