| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-10 | A system microcomputer malfunction. | ·
"iPod" or USB device ·
Multi-media interface ECU |
| CB-11 | A media interface microcomputer malfunction. | |
| CB-12 | A CD-LSI (large scale integration) malfunction. |
After the inspection is completed, clear the DTCs.
Disconnect the USB device or "iPod" from the stereo jack adapter.
Turn the ignition switch off.
When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter.
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).
NEXT
Check for DTCs and check if the same DTC occurs again.
If DTCs are output frequently, replace the multi-media interface ECU.
Malfunction disappears.
OK
NG