Home › Audio / Visual / Telematics › AUDIO / VIDEO › WINDOW GLASS ANTENNA WIRE › from 2013.08
RM1440E _56 Audio / Visual / Telematics _056150 AUDIO / VIDEO _0274039 WINDOW GLASS ANTENNA WIRE G

AUDIO / VIDEO  WINDOW GLASS ANTENNA WIRE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT WINDOW GLASS ANTENNA WIRE

a.
E111994E14
0.432,0.608 0.620,0.764 0.188,0.156 10 *a 0.946,1.965 1.141,2.114 0.194,0.149 10 *b 2.178,1.735 2.366,1.884 0.188,0.149 10 *c 0.528,0.797 0.602,1.13 false 0.97,1.623 1.044,1.956 false 2.192,1.375 2.266,1.708 false

Check for continuity of the window glass antenna wire.

Text in Illustration
*a Tester Probe
*b Window Glass Antenna Wire
*c Tin Foil

HINT:

Check for continuity at the center of each window glass antenna wire as shown in the illustration.


NOTICE:
·

When cleaning the rear quarter window assembly, wipe it in the direction of the window glass antenna wire with a soft dry cloth. Take care not to damage the window glass antenna wire. Do not use detergents or glass cleaners with abrasive ingredients.

·

When measuring resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the window glass antenna wire with your finger, as shown in the illustration.



OK:

There is continuity in the window glass antenna wire.


If the result is not as specified, repair the window glass antenna wire.