| No. | ECU/Sensor Name |
|---|---|
| 1 | ECM |
| 2 | Four wheel drive control ECU* |
| 3 | Yaw rate sensor assembly |
| 4 | Power steering ECU assembly |
| 5 | Air conditioning amplifier assembly |
| 6 | Main body ECU (multiplex network body ECU) |
| 7 | DLC3 |
| 8 | Center airbag sensor assembly |
| 9 | Spiral cable sub-assembly (steering angle sensor) |
| 10 | Master cylinder solenoid (skid control ECU) |
| 11 | Combination meter assembly |
*: for 4WD
V1 BUS
The master cylinder solenoid (skid control ECU) stores spiral cable sub-assembly (steering angle sensor) and yaw rate sensor assembly DTCs and performs DTC communication by receiving information from the spiral cable sub-assembly (steering angle sensor) and yaw rate sensor assembly.
The ECM uses the CAN communication system to perform DTC communication instead of the conventional communication line (SIL).