Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM1440E _58 Vehicle Interior _056155 DOOR LOCK _0274054 POWER DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  INITIALIZATION  


PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL


NOTICE:
·

After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.

·

If the necessary procedure is not performed, the back door cannot be opened or closed.



a.

Perform an unlock operation with the door control switch of the multiplex network master switch with the back door closed.