CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Turn the intelligent tester on.
Enter the following menus: Customize.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
|---|---|---|---|
| Auto Lock | OFF | Function that locks all doors when the vehicle speed reaches a certain level. | ON or OFF |
| Auto Lock/Shift | ON | Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. | ON or OFF |
| Auto Unlock/Shift | ON | Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. | ON or OFF |
| All Unlock/Open-Close | OFF | Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off. | ON or OFF |