Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH
RM1440E _58 Vehicle Interior _056155 DOOR LOCK _0274057 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84930 1.INSPECT DOOR CONTROL SWITCH ASSEMBLY

a.
B220755E03
0.103,0.113 0.356,0.352 0.253,0.239 10 *a 0.223,0.861 0.383,1.072 0.159,0.211 10 *b 1.667,0.44 1.893,0.651 0.225,0.211 10 *c 2.37,1.918 2.588,2.067 0.218,0.149 10 UL 1.916,1.918 2.038,2.067 0.122,0.149 10 L 2.127,1.918 2.255,2.067 0.128,0.149 10 E 2.501,1.918 2.704,1.61 false 2.183,1.918 2.48,1.569 false 1.994,1.918 2.318,1.606 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (L) - 3 (E) Lock Below 1 Ω
4 (L) - 3 (E) Off 10 kΩ or higher
2 (UL) - 3 (E) Unlock Below 1 Ω
2 (UL) - 3 (E) Off 10 kΩ or higher


If the result is not as specified, replace the door control switch assembly.

Text in Illustration
*a Component without harness connected
(Door Control Switch Assembly)
*b Unlock
*c Lock