67491A
1.REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH
Detach the 2 clips and remove the front door lower frame bracket garnish RH.
69297A
2.REMOVE DOOR NO. 2 INSIDE HANDLE BEZEL RH
Using a moulding remover, detach the 3 claws and remove the No.2 inside handle bezel RH as shown in the illustration.
67601
3.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
Detach the 4 claws and 2 door armrest caps.
Remove the 3 screws.
Detach the 11 clips.
Pull out the front door trim board sub-assembly RH in the direction indicated by the arrow as shown in the illustration.
| *1 | Reference Boss |
Raise the front door trim board sub-assembly RH to detach the 4 claws and remove the front door trim board sub-assembly RH together with the front door inner glass weatherstrip RH.
Disconnect the connector.
Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.
68171B
4.REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP RH
Using a screwdriver, detach the 4 claws and remove the front door inner glass weatherstrip RH from the front door trim board sub-assembly RH as shown in the illustration.
84930
5.REMOVE DOOR CONTROL SWITCH ASSEMBLY
Disconnect the door control switch connector.
Detach the 2 claws and remove the door control switch assembly.