Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM1440E _58 Vehicle Interior _056155 DOOR LOCK _0274058 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151E14
1.646,3.063 2.438,3.063 false 0.542,3.063 1.333,3.063 false 0.188,2.979 0.5,3.156 0.313,0.177 10 false UN- 2.5,2.99 2.844,3.177 0.344,0.188 10 false UN+ 0.083,1.542 0.313,1.75 0.229,0.208 10 false *c 1.396,0.104 1.604,0.281 0.208,0.177 10 false *a 1.406,0.417 1.625,0.615 0.219,0.198 10 false *b

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.

Text in Illustration
*a Not pushed
*b Pushed
*c Component without harness connected
(Unlock Warning Switch Assembly)