89747
1.INSPECT WIRELESS DOOR LOCK BUZZER
Measure the resistance according to the value(s) in the table below.
The buzzer activation circuit is built into the ECU, not into the buzzer itself. When battery voltage is applied directly to the buzzer, the buzzer will not sound.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 285 to 315Ω |
If the result is not as specified, replace the wireless door lock buzzer.
| *a | Component without harness connected
(Wireless Door Lock Buzzer) |