Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM › 2009.08–2011.10
RM1440E _58 Vehicle Interior _056155 DOOR LOCK _0274064 WIRELESS DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Utility / Customize.


e.

Select the setting by referring to the table below.

Wireless Door Lock
Display (item) Default Function Setting
Wireless Control ON The function that turns the wireless door lock on or off. ON or OFF
Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF
Panic Function ON The function to operate the theft deterrent system by continuously pressing the panic switch on the transmitter for 0.8 seconds. ON or OFF
Auto Lock Time 30 s The function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s, 60 s or 120 s
Wireless Buzzer Resp ON This function turns the wireless door lock buzzer response on or off. ON or OFF
P/W Ope buzzer ON This function turns the wireless power window buzzer response on or off. ON or OFF
Wireless Buzzer Vol Level7 This function changes the wireless door lock buzzer volume. Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0