87810
1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
Connect the connector.
87834
2.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
w/ Rear Monitor:
Attach the 2 claws of the inner rear view mirror stay holder cover to the mirror. Then slide the inner rear view mirror stay holder cover in the direction indicated by the arrow in the illustration to attach the 2 claws to the roof headlining and install the inner rear view mirror stay holder cover.
w/o Rear Monitor:
Attach the 6 claws.
Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow in the illustration and attach the 2 claws to install it.
87810
3.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
Slide and install the inner rear view mirror as shown in the illustration.
Attach the 2 claws to install the cover.