Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT AIRBAG SENSOR
RM1440E _58 Vehicle Interior _056160 SUPPLEMENTAL RESTRAINT SYSTEMS _0274096 FRONT AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT AIRBAG SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 89174A 1.CHECK FRONT AIRBAG SENSOR LH (VEHICLE NOT INVOLVED IN COLLISION)

Hide 89174A 2.CHECK FRONT AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

When the front bumper of the vehicle or the surrounding area is damaged, check if there is any damage to the front airbag sensor. If the front airbag sensor has defects as mentioned below, replace it with a new one:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation of the front airbag sensor, be sure to follow the correct procedure.



Hide 89174A 3.CHECK FRONT AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

a.

When airbags have deployed as the result of a collision, be certain to replace all front airbag sensors in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace any front airbag sensor in undamaged areas that have registered a major collision, or which exhibits any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation of the front airbag sensor, be sure to follow the correct procedure.