Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR FLOOR AIRBAG SENSOR
RM1440E _58 Vehicle Interior _056160 SUPPLEMENTAL RESTRAINT SYSTEMS _0274099 REAR FLOOR AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR FLOOR AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89837A 1.CHECK REAR FLOOR SIDE AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

Hide 89837A 2.CHECK REAR FLOOR SIDE AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

When the quarter panel of the vehicle or the surrounding area is damaged, check if there is any damage to the rear floor side airbag sensor. If there are any defects as mentioned below, replace the rear floor side airbag sensor with a new one:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedure.



Hide 89837A 3.CHECK REAR FLOOR SIDE AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

a.

When airbags have deployed as the result of a collision, be certain to replace the rear floor airbag sensor in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace the rear floor airbag sensor in an undamaged area that has registered a major collision, or which exhibits any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedure.