Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY
RM1440E _58 Vehicle Interior _056161 SEAT _0274102 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

Place the rear No. 2 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If installing the seat on the RH side with the LH side installed, install it with the rear seat leg cover LH raised.



b.

Temporarily install the 4 bolts.


c.

Tighten the 4 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.
B240281E01
1.287,1.465 1.439,1.610 0.152,0.145 10 *1 0.941,1.553 1.267,1.553 false 2.172,1.027 2.324,1.172 0.152,0.145 10 *1 2.66,0.917 2.26,0.917 2.26,0.917 2.26,1.012 false

Attach the 6 claws and 2 guides to close the 2 covers.

Text in Illustration
*1 Guide


Hide 58417D 2.INSTALL NO. 1 DECK BOARD BRACKET LH

a.

Install the bracket with the 2 bolts.


Hide 58439D 3.INSTALL DECK BOARD BRACKET REINFORCEMENT

a.

Attach the 2 hooks to install the reinforcement.


b.

Install the 2 bolts.


Hide 58417 4.INSTALL REAR NO. 3 FLOOR BOARD

a.
B240282E01
0.099,1.11 0.259,1.252 0.161,0.142 10 *1 0.425,1.259 0.425,1.191 0.425,1.191 0.288,1.191 false 1.256,1.543 1.417,1.685 0.161,0.142 10 *1 0.757,1.631 1.247,1.631 false

Attach the 2 guides and 4 claws.

Text in Illustration
*1 Guide


b.

Attach the clip to install the board.


Hide 58418A 5.INSTALL REAR NO. 4 FLOOR BOARD

a.
B240283E02
2.823,1.438 2.823,1.615 2.823,1.615 2.938,1.615 false 2.854,1.615 2.802,1.615 false 2.99,1.542 3.146,1.688 0.156,0.146 10 false *1

Attach the 2 guides and 4 claws.

Text in Illustration
*1 Guide


b.

Attach the clip to install the board.


Hide 58574A 6.INSTALL REAR FLOOR MAT SUPPORT PLATE

a.

Attach the 5 clips and 2 guides.


b.

Attach the 4 claws to install the plate.


c.

Install the 3 bolts.


Hide 58410R 7.INSTALL DECK BOARD ASSEMBLY

a.

Attach the 4 clips to install the board.


b.

Install the 2 bolts.


c.
B240101

Attach the 2 claws to close the cover.

HINT:

Use the same procedure to close the cover on the other side.