Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY
RM1440E _58 Vehicle Interior _056161 SEAT _0274102 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 58410R 1.REMOVE DECK BOARD ASSEMBLY

a.

Pull the 2 rear seat lock release straps and fold down the 2 headrests.


b.

Operate the 2 rear seat lock release levers and fold down the 2 seatbacks.


c.
B237359E01
2.156,2.594 2.314,2.736 0.158,0.142 10 *1 1.808,1.95 1.808,2.669 1.808,2.669 2.133,2.669 false

Using a screwdriver, detach the 2 claws and open the cover.

Text in Illustration
*1 Protective Tape

HINT:
·

Tape the screwdriver tip before use.

·

Use the same procedure to open the cover on the other side.




d.
B237360

Remove the 2 bolts.


e.

Detach the 4 clips and remove the deck board.


Hide 58574A 2.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.

Remove the 3 bolts.

B237363E02
1.521,1.688 1.125,1.938 1.125,1.938 0.917,1.938 false 5.625,1.688 6.063,1.958 6.063,1.958 6.229,1.958 false 0.771,1.865 0.927,2.01 0.156,0.146 10 false *1 6.26,1.885 6.417,2.031 0.156,0.146 10 false *1

Text in Illustration
*1 Guide - -


b.

Detach the 4 claws and 2 guides.


c.

Detach the 5 clips and remove the support plate.


Hide 58418A 3.REMOVE REAR NO. 4 FLOOR BOARD

a.
B237361E02
2.833,1.438 2.833,1.521 2.833,1.521 2.979,1.521 false 2.865,1.521 2.802,1.521 false 3,1.438 3.156,1.583 0.156,0.146 10 false *1

Using a moulding remover, detach the clip and 4 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58417 4.REMOVE REAR NO. 3 FLOOR BOARD

a.
B237362E01
0.107,1.083 0.256,1.228 0.149,0.145 10 *1 0.43,1.265 0.43,1.171 0.43,1.171 0.288,1.171 false 1.25,1.549 1.399,1.695 0.149,0.145 10 *1 0.757,1.633 1.236,1.633 false

Using a moulding remover, detach the clip and 4 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58439D 5.REMOVE DECK BOARD BRACKET REINFORCEMENT

a.
B237364E01
0.904,0.821 1.057,0.966 0.152,0.145 10 *1 0.651,1.079 0.797,0.907 0.797,0.907 0.878,0.907 false 2.421,0.816 2.573,0.962 0.152,0.145 10 *1 2.838,1.066 2.692,0.894 2.692,0.894 2.61,0.894 false

Remove the 2 bolts.

Text in Illustration
*1 Hook


b.

Detach the 2 hooks and remove the reinforcement.


Hide 58417D 6.REMOVE NO. 1 DECK BOARD BRACKET LH

a.
B237365

Remove the 2 bolts and bracket.


Hide 7.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

Operate the seat cushion lock release lever and raise the seatback.


b.

Pull out the seat cushion.


c.
B237367

Remove the 2 bolts.


d.
B237357E04
2.719,0.813 2.438,0.813 false 0.448,1.406 0.729,1.406 false 2.688,1.021 2.406,1.021 false 0.708,1.656 0.302,1.656 false 0.292,1.323 0.448,1.469 0.156,0.146 10 true *1 2.219,0.927 2.375,1.073 0.156,0.146 10 false *2 2.271,0.729 2.427,0.875 0.156,0.146 10 true *1 0.115,1.573 0.271,1.719 0.156,0.146 10 false *2

Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

Text in Illustration
*1 Guide
*2 Protective Tape


e.
B237358

Remove the 2 bolts.


f.
B236507

Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If removing the seat on the RH side with the LH side installed, remove it with the No. 3 rear seat leg cover LH raised as shown in the illustration.