Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › from 2013.08
RM1440E _58 Vehicle Interior _056161 SEAT _0274104 FRONT SEAT ASSEMBLY(for Power Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 71620S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY

a.

for Driver Side:

i.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seat cushion spring assembly (slide motor).

Check that the separate type front seat cushion spring assembly moves smoothly when the battery is connected to the slide motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2
Battery negative (-) → 1
Forward
Battery positive (+) → 1
Battery negative (-) → 2
Backward


If the result is not as specified, replace the separate type front seat cushion spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seat Cushion Spring Assembly (Slide Motor))


ii.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seat cushion spring assembly (front vertical motor).

Check that the separate type front seat cushion spring assembly moves smoothly when the battery is connected to the front vertical motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2
Battery negative (-) → 1
Upward
Battery positive (+) → 1
Battery negative (-) → 2
Downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seat Cushion Spring Assembly (Front Vertical Motor))


iii.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seat cushion spring assembly (lifter motor).

Check that the separate type front seat cushion spring assembly moves smoothly when the battery is connected to the lifter motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Upward
Battery positive (+) → 2
Battery negative (-) → 1
Downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seat Cushion Spring Assembly (Lifter Motor))



b.

for Front Passenger Side:

i.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the front seat cushion spring (slide motor).

Check that the front seat cushion spring moves smoothly when the battery is connected to the slide motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Forward
Battery positive (+) → 2
Battery negative (-) → 1
Backward


If the result is not as specified, replace the front seat cushion spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seat Cushion Spring Assembly (Slide Motor))



Hide 71640S 2.INSPECT SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.

for Driver Side:

i.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seatback spring assembly (reclining motor).

Check that the separate type front seatback spring assembly moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Forward
Battery positive (+) → 2
Battery negative (-) → 1
Backward


If the result is not as specified, replace the separate type front seatback spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seatback Spring Assembly (Reclining Motor))


ii.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seatback spring assembly (lumbar motor).

Check that the separate type front seatback spring assembly moves smoothly when the battery is connected to the lumbar motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Forward
Battery positive (+) → 2
Battery negative (-) → 1
Backward


If the result is not as specified, replace the separate type front seatback spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seatback Spring Assembly (Lumbar Motor))



b.

for Front Passenger Side:

i.
B161051E22
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the separate type front seatback spring assembly (reclining motor).

Check that the separate type front seatback spring assembly moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Forward
Battery positive (+) → 2
Battery negative (-) → 1
Backward


If the result is not as specified, replace the separate type front seatback spring assembly.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seatback Spring Assembly (Reclining Motor))