Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side)
RM1440E _58 Vehicle Interior _056161 SEAT _0274107 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 72152A 2.REMOVE REAR SEAT TRACK INNER BRACKET COVER

B237608

a.

Using a moulding remover, detach the 2 claws and guide, and then remove the cover.


Hide 72159B 3.REMOVE REAR SEAT TRACK OUTER BRACKET COVER

B237606

a.

Using a moulding remover, detach the 2 claws.


b.

Move the cover in the direction of the arrow to detach the 2 guides, and then remove the cover.


Hide 72158 4.REMOVE SEAT TRACK INNER BRACKET COVER LH

B237612

a.

Using a clip remover, detach the 6 clips and remove the cover.


Hide 72138A 5.REMOVE REAR SEAT TRACK COVER LH

B237610

a.

Using a clip remover, detach the 3 clips and remove the cover.


Hide 6.REMOVE REAR SEAT ASSEMBLY LH

B237788

a.

Disconnect the center inner seat belt from the seat.


b.

Remove the 5 bolts, nut and seat.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

Be sure to remove the seat with the seatback folded down.