Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)
RM1440E _58 Vehicle Interior _056161 SEAT _0274108 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL REAR SEAT ASSEMBLY RH

B237614E03
1.042,3.99 1.271,4.167 0.229,0.177 10 false (1) 1.365,4.146 1.594,4.323 0.229,0.177 10 false (2) 2.292,1.385 2.521,1.563 0.229,0.177 10 false (4) 1.781,1.365 2.01,1.542 0.229,0.177 10 false (3)

a.

Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

Be sure to install the seat with the seatback folded down.



b.

Connect the center inner belt to the seat.


c.

Temporarily install the seat with the 5 bolts and nut.


d.

Tighten the bolts and nut in the order indicated in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 72137D 2.INSTALL REAR SEAT TRACK COVER RH

a.

Attach the 5 clips and claw to install the cover.


Hide 72157A 3.INSTALL SEAT TRACK INNER BRACKET COVER RH

a.

Attach the 8 clips to install the cover.


Hide 72159B 4.INSTALL REAR SEAT TRACK OUTER BRACKET COVER

B237704

a.

Move the cover in the direction of the arrow to attach the 2 guides.


b.

Attach the 2 claws to install the cover.


Hide 72152A 5.INSTALL REAR SEAT TRACK INNER BRACKET COVER

B237706

a.

Attach the 2 claws and guide to install the cover.


Hide 71940A 6.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the headrest.