Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)
RM1440E _58 Vehicle Interior _056161 SEAT _0274108 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 72152A 2.REMOVE REAR SEAT TRACK INNER BRACKET COVER

B237705

a.

Using a moulding remover, detach the 2 claws and guide, and then remove the cover.


Hide 72159B 3.REMOVE REAR SEAT TRACK OUTER BRACKET COVER

B237703

a.

Using a moulding remover, detach the 2 claws.


b.

Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.


Hide 72157A 4.REMOVE SEAT TRACK INNER BRACKET COVER RH

B237797

a.

Using a clip remover, detach the 8 clips and remove the cover.


Hide 72137D 5.REMOVE REAR SEAT TRACK COVER RH

B237798

a.

Using a clip remover, detach the 5 clips and claw, and then remove the cover.


Hide 6.REMOVE REAR SEAT ASSEMBLY RH

B237789

a.

Disconnect the center inner seat belt from the seat.


b.

Remove the 5 bolts and nut.


c.

Remove the rear seat.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

Be sure to remove the seat with the seatback folded down.