Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) › from 2011.10
RM1440E _58 Vehicle Interior _056161 SEAT _0274108 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type RH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71845A 1.REMOVE REAR SEAT UPPER RECLINING COVER RH

B237712E02
1.563,1.979 1.396,1.979 1.396,1.979 0.969,1.656 true 1.594,1.906 1.823,2.104 0.229,0.198 10 false *1

a.

Using a screwdriver, detach the 3 claws and remove the cover.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72525B 2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

B237713

a.

Remove the 3 screws and handle.


Hide 71825B 3.REMOVE REAR SEAT CUSHION MOULDING RH

B237716

a.

Using a clip remover, detach the clip.


b.

Using a moulding remover, detach the 3 claws.


c.

Move the moulding in the direction of the arrow to detach the guide and remove the moulding.


Hide 71829B 4.REMOVE REAR SEAT REAR CUSHION MOULDING LH

B237799

a.

Remove the screw.


b.

Using a moulding remover, detach the 3 claws.


c.

Detach the 2 guides and remove the moulding.


Hide 72615A 7.REMOVE REAR SEATBACK LOCK STRIKER COVER RH

B237718

a.

Using a clip remover, detach the 3 clips and remove the cover.


Hide 8.REMOVE SEAT CUSHION COVER WITH PAD

a.
B237909

Detach the hooks and remove the seat cushion cover with pad.


Hide 71696 9.REMOVE REAR NO. 2 SEAT PROTECTOR

B237723

a.

Remove the 2 protectors from the cushion pad.


Hide 71647 10.REMOVE REAR SEAT CUSHION EDGE PROTECTOR

a.

Remove the protector from the cushion spring.


Hide 71075S 11.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

B237911

a.

Remove the 14 hog rings and seat cushion cover from the seat cushion pad.


Hide 72572B 12.REMOVE RECLINING ADJUSTER KNOB CAP RH

a.
B237754E03
0.833,0.979 0.927,0.979 0.927,0.979 1.219,1.781 true 0.646,0.896 0.802,1.063 0.156,0.167 10 false *1

Using a screwdriver, detach the claw and guide, and then remove the cap.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72057 13.REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

a.
B237756

Remove the 2 screws.


b.
B165052E07
0.594,1.188 0.802,1.417 0.208,0.229 10 false (1) 1.021,2.167 1.229,2.375 0.208,0.208 10 true (2) 1.135,2.885 1.344,3.104 0.208,0.219 10 true (3)

Disconnect the cable in the order shown in the illustration and remove the lever.


Hide 71845C 14.REMOVE REAR SEAT COVER CAP

B237913

a.

Using a screwdriver, detach the claw and guide, and then remove the cover cap.

HINT:

Tape the screwdriver tip before use.



Hide 72067A 15.REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

B237965

a.

Remove the 2 screws.


b.

Move the lever in the direction of the arrow to detach the guide and remove the lever.


c.

Detach the cable clamp and disconnect the cable from the lever.


Hide 72996A 16.REMOVE REAR SEATBACK COVER

B237641

a.

Using a screwdriver, detach the 4 claws and remove the cover.

HINT:

Tape the screwdriver tip before use.



Hide 71880A 17.REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

B237915

a.

Using a clip remover, detach the 7 clips and remove the carpet.


Hide 71931B 18.REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

B237672

a.

Detach the 4 claws and remove the 2 supports.


Hide 19.REMOVE SEATBACK COVER WITH PAD

B237916E03
1.875,0.177 2.042,0.177 2.042,0.177 2.698,0.448 true 2.042,0.188 2.896,0.344 false 2.177,1.677 2.896,1.677 false 2.042,0.177 2.25,1.052 true 1.688,0.052 1.865,0.25 0.177,0.198 10 false *1 2.917,1.594 3.094,1.792 0.177,0.198 10 false *2

a.

Remove the 12 hog rings and detach the hooks, and then remove the seatback cover with pad.

Text in Illustration
*1 Hook
*2 Hog Ring


Hide 71077S 20.REMOVE SEPARATE TYPE REAR SEATBACK COVER

B241213

a.

Remove the 8 hog rings and cover from the seatback pad.


Hide 71587A 21.REMOVE REAR SEATBACK EDGE PROTECTOR

a.

Remove the protector from the seatback frame.


Hide 71879C 22.REMOVE REAR SEAT INNER RECLINING COVER RH

B237920

a.

Remove the 2 screws.


b.

Detach the guide and remove the cover.


Hide 71875J 23.REMOVE RECLINING ADJUSTER INSIDE COVER RH

B237770

a.

Remove the 2 screws.


b.

Detach the 2 claws and remove the cover.


Hide 71876C 24.REMOVE RECLINING ADJUSTER INSIDE COVER RH

B237918

a.

Using a clip remover, detach the clip.


b.

Move the cover in the direction of the arrow to detach the 2 claws and remove the cover.


Hide 71875E 25.REMOVE RECLINING ADJUSTER INSIDE COVER RH

B237919

a.

Detach the claw and guide and remove the cover.


Hide 71499D 26.REMOVE REAR SEAT BACK SPRING DAMPER

a.
B295840

Remove the 2 nuts and rear seat back spring damper.


Hide 71499D 27.REMOVE REAR SEAT BACK SPRING DAMPER

a.
B237967

Remove the 2 nuts and rear seat back spring damper.


Hide 72704A 28.REMOVE REAR SEAT RECLINING CONTROL CABLE

a.

Cut off the 3 cable ties.

B237921


b.

Detach the 2 cable clamps and disconnect the cable, and then remove the cable.

B237922


Hide 72704B 29.REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE

a.

Detach the cable clamp and disconnect the cable, and then remove the cable.

B237923


Hide 71246A 30.REMOVE REAR SEAT CUSHION SET PLATE

B237924

a.

Remove the 2 nuts and set plate.


Hide 72631 31.REMOVE REAR SEATBACK LOCK PLATE RH

a.

Detach the 2 cable clamps and disconnect the cable.


b.

Remove the nut and lock plate.

B237925


Hide 71017 32.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH

B237926

a.

Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and seatback frame.


Hide 72995A 33.REMOVE REAR SEAT COVER

B237927

a.

Remove the screw and cover.


Hide 71461 34.REMOVE REAR SEAT CUSHION SPRING

B237928

a.

Detach the 2 hooks and remove the spring.


Hide 71015A 35.REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH

B237932E03
1.729,0.167 1.896,0.167 1.896,0.167 2.125,0.573 true 1.552,0.083 1.719,0.25 0.167,0.167 10 false *1

a.

Remove the 6 nuts and seat cushion frame together with the No. 1 seat leg plate.

Text in Illustration
*1 No. 1 Seat Leg Plate


Hide 72173A 36.REMOVE REAR SEAT TRACK ADJUSTING HANDLE RH

a.
B237929

Remove the seat cushion side frame.


b.
B237930

Slide the slide rail to the rearmost position.


c.

Using a small screwdriver, push down the handle stopper to detach the claw and remove the adjusting handle.

HINT:

Insert the screwdriver into the hole shown in the illustration while looking into the hole.