Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › from 2013.08
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274120 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


If a seat belt is not fastened, this system flashes the seat belt warning light or sounds the seat belt warning buzzer as a reminder.

a.

Driver side seat belt warning light:

When the driver side seat belt is not fastened with the ignition switch ON, the seat belt warning light in the combination meter assembly blinks to inform the driver. The center airbag sensor assembly detects the driver side seat belt status and sends signals to the combination meter assembly using the CAN.


b.

Front passenger side seat belt warning light:

When the front passenger side seat belt is not fastened with the ignition switch ON and the front passenger seat occupied, the seat belt warning light in the combination meter assembly blinks. The seat belt warning light in the combination meter assembly indicates the front passenger side seat belt status and whether the front passenger seat is occupied.


c.

Seat belt warning buzzer:

When the vehicle is driven at approximately 20 km/h (12 mph) while the driver or front passenger side seat belt is unfastened, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds. After that, the buzzer sounds at an interval of 0.4 seconds for 90 seconds.



FUNCTION OF MAIN COMPONENT


The following functions are available.

Components Function
Front seat inner belt assembly LH (driver side buckle switch) Signals the center airbag sensor assembly of the driver side seat belt condition (fastened or unfastened).
Front seat inner belt assembly RH (front passenger side buckle switch) Signals the combination meter assembly of the front passenger side seat belt condition (fastened or unfastened).
Occupant detection sensor (separate type front seat cushion pad) Signals the combination meter assembly of the front passenger seat condition (occupied or unoccupied).
Driver side seat belt warning light If the driver side seat belt is unfastened and the ignition switch is ON, the seat belt warning light in the combination meter assembly blinks as a reminder.
Front passenger side seat belt warning light When the front passenger seat is occupied and the ignition switch is ON, if the front passenger side seat belt is unfastened, the combination meter assembly blinks as a reminder.
Seat belt warning buzzer If the vehicle is driven at approximately 20 km/h (12 mph) or more with either of the following conditions met, the combination meter sounds the buzzer as a reminder: 1) the driver side seat belt is unfastened, or 2) the front passenger side seat belt is unfastened with the front passenger seat occupied.