73230
1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
| *1 | Connector A | *2 | Connector B |
| *a | Component without harness connected
(Front Seat Inner Belt Assembly) |
- | - |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A2 - B3 | Always | Below 1 Ω |
| A3 - B1 | Seat belt fastened
(Buckle switch is on) |
1 MΩ or higher |
| A3 - B1 | Seat belt unfastened
(Buckle switch is off) |
Below 1 Ω |
If the result is not as specified, replace the front seat inner belt assembly.