Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274126 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) A

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 73380C 1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.

Install the inner belt with the 2 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73360C 2.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

B242821E02
1.284,2.497 1.256,2.553 false 1.302,2.501 1.28,2.542 false 1.293,2.5 1.271,2.541 false 1.32,2.499 1.294,2.549 false 1.312,2.5 1.288,2.545 false 1.334,2.507 1.31,2.554 false 1.328,2.503 1.304,2.551 false 1.34,2.511 1.316,2.558 false 1.315,2.531 2.166,2.553 false 2.208,2.471 2.528,2.756 0.319,0.284 10 *a

a.

Connect the outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the seat belt must not overlap the protruding part.


Text in Illustration
*a Protruding Part


b.

Return the seat cushion to its original position.