Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274130 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
U136511E04
1.344,0.792 1.302,1.094 false 0.729,0.125 0.938,0.271 0.208,0.146 10 false *a 2.802,1.198 3.01,1.344 0.208,0.146 10 false *b 1.958,0.208 2.271,0.354 0.313,0.146 10 false 45°

Check the ELR.

i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.

If the operation is not as specified, replace the seat belt assembly.

Text in Illustration
*a Unlock
*b Lock
*c 45°



b.

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, check that the belt automatically starts to retract.


ii.

After the belt is fully retracted, check that the belt can be pulled out and retracted again.

If the operation is not as specified, replace the belt assembly.