Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274134 REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73360C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

B242818E04
1.229,0.115 1.427,0.323 0.198,0.208 10 false *c 2.417,0.146 2.646,0.344 0.229,0.198 10 false *a 0.469,0.646 0.677,0.906 0.208,0.26 10 false *b

NOTICE:

Do not disassemble the retractor.


a.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.

If the operation is not as specified, replace the belt.


b.

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, check that the belt automatically starts to retract.


ii.

After the belt is fully retracted, check that the belt can be pulled out and retracted again. If the operation is not as specified, replace the belt assembly.

Text in Illustration
*a Unlock
*b Lock
*c 45°