Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR
RM1440E _58 Vehicle Interior _056163 HEATING / AIR CONDITIONING _0274142 FRONT EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR

a.

Measure the resistance according to the value(s) in the table below.

E353423E01
0.76,1.521 0.833,1.031 0.833,1.031 0.958,1.031 false 1.01,0.938 1.323,1.135 0.313,0.198 10 false *1 0.646,0.5 0.958,0.698 0.313,0.198 10 false *a 3.573,0.146 3.885,0.344 0.313,0.198 10 false *b 3.865,0.208 4.177,0.406 0.313,0.198 10 false 10.0 3.938,0.385 4.25,0.583 0.313,0.198 10 false 9.0 3.938,0.563 4.25,0.76 0.313,0.198 10 false 8.0 3.938,0.74 4.25,0.938 0.313,0.198 10 false 7.0 3.948,0.917 4.26,1.115 0.313,0.198 10 false 6.0 3.948,1.094 4.26,1.292 0.313,0.198 10 false 5.0 3.948,1.281 4.26,1.479 0.313,0.198 10 false 4.0 3.948,1.458 4.26,1.656 0.313,0.198 10 false 3.0 3.958,1.635 4.271,1.833 0.313,0.198 10 false 2.0 3.948,1.823 4.26,2.021 0.313,0.198 10 false 1.0 3.958,2.01 4.271,2.208 0.313,0.198 10 false 0.0 4.167,2.094 4.479,2.292 0.313,0.198 10 false -10 4.729,2.094 5.042,2.292 0.313,0.198 10 false 0 5.271,2.094 5.583,2.292 0.313,0.198 10 false 10 5.865,2.094 6.177,2.292 0.313,0.198 10 false 20 6.427,2.094 6.74,2.292 0.313,0.198 10 false 30 4.167,2.24 4.479,2.438 0.313,0.198 10 false (14) 4.656,2.25 4.969,2.448 0.313,0.198 10 false (32) 5.24,2.25 5.552,2.448 0.313,0.198 10 false (50) 5.833,2.25 6.146,2.448 0.313,0.198 10 false (68) 6.396,2.25 6.708,2.448 0.313,0.198 10 false (86) 5.281,2.479 5.594,2.677 0.313,0.198 10 false *c

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) 7.30 to 9.10 kΩ
1 - 2 -5°C (23°F) 5.65 to 6.95 kΩ
1 - 2 0°C (32°F) 4.40 to 5.35 kΩ
1 - 2 5°C (41°F) 3.40 to 4.15 kΩ
1 - 2 10°C (50°F) 2.70 to 3.25 kΩ
1 - 2 15°C (59°F) 2.14 to 2.58 kΩ
1 - 2 20°C (68°F) 1.71 to 2.05 kΩ
1 - 2 25°C (77°F) 1.38 to 1.64 kΩ
1 - 2 30°C (86°F) 1.11 to 1.32 kΩ


HINT:

As the temperature increases, the resistance decreases (refer to the graph).


NOTICE:
·

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.


·

When measuring, the sensor temperature must be almost the same as the ambient temperature.



If the result is not as specified, replace the No. 1 cooler thermistor.

Text in Illustration
*1 Sensor
*a Component without harness connected
(No. 1 Cooler Thermistor)
*b Resistance (kΩ)
*c Temperature (°C(°F))