Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM1440E _58 Vehicle Interior _056163 HEATING / AIR CONDITIONING _0274146 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E199374

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E203692E01
0.679,0.226 0.976,0.418 0.297,0.192 10 SST 1.026,0.315 1.134,0.315 1.134,0.315 1.134,0.832 false

a.

Clamp the cooler compressor in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
07112-76060  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.