85934
1.REMOVE MAGNET CLUTCH RELAY
Remove the magnet clutch relay from the engine room relay block.
| *1 | Magnet Clutch Relay | - | - |
85934
2.INSPECT MAGNET CLUTCH RELAY
Measure the resistance of the magnet clutch relay.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminal 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the relay.
85934
3.INSTALL MAGNET CLUTCH RELAY
Install the magnet clutch relay to the engine room relay block.