Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2009.08–2013.08
RM1440E _58 Vehicle Interior _056165 INTERIOR PANELS / TRIM _0274157 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REASSEMBLY  


PROCEDURE

Hide 89120 3.INSTALL AUTOMATIC LIGHT CONTROL SENSOR

Hide 73960A 4.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 82142 5.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.

Attach the 15 clamps to install the No. 2 instrument panel wire.


b.

Connect the connector.


Hide 55950G 7.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.

Install the defroster nozzle with the 3 screws.


Hide 55845A 8.INSTALL NO. 3 HEATER TO REGISTER DUCT

a.

Attach the claw to install the No. 3 heater to register duct.


b.

Install the 2 screws.


Hide 55972C 9.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws to install the No. 2 side defroster nozzle duct.


b.

Install the screw.


Hide 55971C 10.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws to install the No. 1 side defroster nozzle duct.


b.

Install the screw.


Hide 55844 11.INSTALL NO. 2 HEATER TO REGISTER DUCT

a.

Install the No. 2 heater to register duct with the 4 screws.


Hide 55843A 12.INSTALL NO. 1 HEATER TO REGISTER DUCT

a.

Install the No. 1 heater to register duct with the 4 screws.