Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2013.08
RM1440E _58 Vehicle Interior _056165 INTERIOR PANELS / TRIM _0274157 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REASSEMBLY  


PROCEDURE

Hide 89120 1.INSTALL AUTOMATIC LIGHT CONTROL SENSOR

Hide 73960A 2.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 82142 3.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.

Attach the 17 clamps to install the No. 2 instrument panel wire.


b.

Connect the connector.


Hide 55950G 6.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.

Install the defroster nozzle assembly with the 3 screws.


Hide 55845A 7.INSTALL NO. 3 HEATER TO REGISTER DUCT

a.

Attach the claw.


b.

Install the No. 3 heater to register duct with the 2 screws.


Hide 55972C 8.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws.


b.

Install the No. 2 side defroster nozzle duct with the screw.


Hide 55971C 9.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws.


b.

Install the No. 1 side defroster nozzle duct with the screw.


Hide 55844 10.INSTALL NO. 2 HEATER TO REGISTER DUCT

a.

Install the No. 2 heater to register duct with the 4 screws.


Hide 55843A 11.INSTALL NO. 1 HEATER TO REGISTER DUCT

a.

Install the No. 1 heater to register duct with the 4 screws.