58905
1.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 6 screws and console compartment door.
58907
2.REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Remove the 2 screws and console compartment door lock.
Remove the 4 screws.
Using a screwdriver, detach the 6 claws and remove the console compartment inner door.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Remove the 4 screws and console compartment door hinge.
58923A
3.REMOVE REAR CONSOLE END PANEL
Detach the 4 clips and 4 claws and remove the rear console end panel.
58860A
4.REMOVE CONSOLE BOX REGISTER ASSEMBLY
Detach the 4 claws and remove the console box register.
58837B
5.REMOVE CONSOLE CUP HOLDER BOX
Remove the 6 screws and console cup holder.
84810E
6.REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
55449E
7.REMOVE SWITCH BASE
Remove the 2 screws and switch base.
58831A
8.REMOVE FRONT UPPER CONSOLE PANEL GARNISH
Detach the 10 claws and remove the front upper console panel garnish.
| *A | for 2WD | *B | for 4WD |
58917
9.REMOVE NO. 2 BOX BOTTOM MAT (for 2WD)
Detach the 4 claws and remove the No. 2 box bottom mat.
84223A
10.REMOVE TRANSFER POSITION SWITCH (for 4WD)