84223A
1.INSTALL TRANSFER POSITION SWITCH (for 4WD)
58917
2.INSTALL NO. 2 BOX BOTTOM MAT (for 2WD)
Attach the 4 claws to install the No. 2 box bottom mat.
58831A
3.INSTALL FRONT UPPER CONSOLE PANEL GARNISH
Attach the 10 claws to install the front upper console panel garnish.
| *A | for 2WD | *B | for 4WD |
55449E
4.INSTALL SWITCH BASE
Install the switch base with the 2 screws.
84810E
5.INSTALL BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
58837B
6.INSTALL CONSOLE CUP HOLDER BOX
Install the console cup holder with the 6 screws.
58860A
7.INSTALL CONSOLE BOX REGISTER ASSEMBLY
Attach the 4 claws to install the console box register.
58923A
8.INSTALL REAR CONSOLE END PANEL
Attach the 4 clips and 4 claws to install the rear console end panel.
58907
9.INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Install the console compartment door hinge with the 4 screws.
Attach the 6 claws to install the console compartment inner door.
Install the 4 screws.
Install the console compartment door lock with the 2 screws.
58905
10.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Install the console compartment door with the 6 screws.