84223A
1.INSTALL TRANSFER POSITION SWITCH (for 4WD)
58917
2.INSTALL NO. 2 BOX BOTTOM MAT (for 2WD)
Attach the 4 claws to install the No. 2 box bottom mat.
58831A
3.INSTALL FRONT UPPER CONSOLE PANEL GARNISH
Attach the 10 claws to install the front upper console panel garnish.
55449E
4.INSTALL SWITCH BASE
Install the switch base with the 2 screws.
84751
5.INSTALL SEAT HEATER SWITCH (w/ Seat Heater System)
84810E
6.INSTALL BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
58837B
7.INSTALL CONSOLE CUP HOLDER BOX
Install the console cup holder box with the 6 screws.
58907
8.INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Install the console compartment door hinge sub-assembly with the 4 screws.
Attach the 6 claws to install the console compartment inner door.
Install the 4 screws.
58908A
9.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Install the console compartment door lock sub-assembly with the 2 screws.
58905
10.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Install the console compartment door sub-assembly with the 6 screws.
58860A
11.INSTALL CONSOLE BOX REGISTER ASSEMBLY
Attach the 4 claws to install the console box register assembly.
85535D
12.INSTALL CENTER POWER OUTLET SOCKET COVER
85530E
13.INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY
58923A
14.INSTALL REAR CONSOLE END PANEL
Connect the 2 power outlet socket assembly connectors.
Attach the 4 clips and 4 claws to install the rear console end panel.
85535B
15.INSTALL NO. 1 POWER OUTLET SOCKET COVER
85530
16.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY