Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM › 2009.08–2015.08
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274161 POWER WINDOW CONTROL SYSTEM D

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize.


e.

Select the setting by referring to the table below.

Power Window
Tester Display Default Content Setting
Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. ON or OFF
Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. ON or OFF
P/W Up W/ Transmitter OFF This function is used to close the windows using the wireless key transmitter. ON or OFF
P/W Down W/ Transmitter OFF This function is used to open the windows using the wireless key transmitter. ON or OFF
P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). Avail or Not Avl
P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. Avail or Not Avl
RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. Avail or Not Avl
RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. Avail or Not Avl
RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. Avail or Not Avl
RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. Avail or Not Avl
Door Key Linked Back P/W UP AVAIL This function is used to close the back door window by operating the mechanical key. NOT AVL or AVAIL
Door Key Linked Back P/W DOWN AVAIL This function is used to open the back door window by operating the mechanical key. NOT AVL or AVAIL