Home › Vehicle Exterior › WINDOW / GLASS › BACK POWER WINDOW SWITCH
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274167 BACK POWER WINDOW SWITCH G

WINDOW / GLASS  BACK POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810E 1.INSPECT BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY

a.
U149783E02
2,2.625 2.417,2.333 2.417,2.333 2.531,2.333 false 1.833,2.969 2.375,3.26 2.375,3.26 2.458,3.26 false 1.521,2.969 0.99,3.167 0.99,3.167 0.875,3.167 false 1.333,2.875 1.01,2.5 1.01,2.5 0.885,2.5 false 0.438,1.594 0.635,1.813 0.198,0.219 10 false *a 0.396,3.094 0.885,3.26 0.49,0.167 10 false DOWN 2.594,2.26 2.948,2.427 0.354,0.167 10 false E 2.531,3.177 2.76,3.344 0.229,0.167 10 false UP 0.479,2.427 0.896,2.688 0.417,0.26 10 false AUTO

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 (UP) - 1 (E) Manual up operation Below 1 Ω
7 (DOWN) - 1 (E) Manual down operation Below 1 Ω
8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω
6 (UP) - 1 (E) Not operated 10 kΩ or higher
7 (DOWN) - 1 (E) Not operated 10 kΩ or higher
8 (AUTO) - 1 (GND) Not operated 10 kΩ or higher


If the result is not as specified, replace the back door power window regulator switch assembly.


Text in Illustration
*a Component without harness connected
(Back Door Power Window Regulator Switch Assembly)