Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274170 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR DEFOGGER WIRE

U115514E02
2.771,1.104 2.771,1.396 false 1.052,0.885 0.656,0.885 0.656,0.885 0.656,1.573 false 1.042,1.292 0.656,1.292 false 1.719,0.979 1.719,0.302 1.719,0.302 2.052,0.302 false 2.083,0.208 2.333,0.385 0.25,0.177 10 false *a 0.552,1.615 0.76,1.865 0.208,0.25 10 false *b 2.719,1.406 2.948,1.615 0.229,0.208 10 false *c

a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.

DuPont paste:

No. 4817 or equivalent


Text in Illustration
*a Repair Point
*b Masking Tape
*c Broken Wire


d.
U115516E02
1.333,0.354 1.719,0.354 false 1.438,0.958 0.521,0.958 0.521,0.958 0.521,1.396 false 1.115,0.229 1.313,0.427 0.198,0.198 10 false *a 0.427,1.417 0.656,1.615 0.229,0.198 10 false *b

Using a fine tip brush, apply a small amount of the agent to the wire.

Text in Illustration
*a Fine Tip Brush
*b Repair Point


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not allow electricity to flow in the defogger wire for at least 24 hours.