Home › Vehicle Exterior › WINDOW / GLASS › RELAY(for Window Defogger)
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274173 RELAY(for Window Defogger) G

WINDOW / GLASS  RELAY(for Window Defogger)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85912 1.REMOVE DEFOGGER RELAY (DEF)

a.
B242838E01
0.878,3.714 1.053,3.886 0.174,0.172 10 *1 1.302,4.013 1.062,3.815 false

Remove the defogger relay from the engine room relay block.

Text in Illustration
*1 Defogger relay


Hide 85912 2.INSPECT DEFOGGER RELAY

a.
B453701E01
1.719,0.344 2.042,0.667 false 2.865,0.333 2.615,0.667 false 2.938,1.125 2.469,1.125 false 2.938,1.615 2.469,1.615 false 0.208,0.76 0.365,0.958 0.156,0.198 10 false 3 1.208,0.76 1.365,0.958 0.156,0.198 10 false 5 0.229,1.271 0.385,1.469 0.156,0.198 10 false 1 1.219,1.281 1.375,1.479 0.156,0.198 10 false 2 3.021,1.042 3.177,1.24 0.156,0.198 10 false 5 3.021,1.542 3.177,1.74 0.156,0.198 10 false 3 1.583,0.167 1.74,0.365 0.156,0.198 10 false 1 2.938,0.156 3.094,0.354 0.156,0.198 10 false 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the defogger relay.


Hide 85912 3.INSTALL DEFOGGER RELAY

a.

Install the defogger relay to the engine room relay block.