Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM1440E _59 Vehicle Exterior _056168 DOOR / HATCH _0274176 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


PROCEDURE

Hide 53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

a.

Horizontally hold the hood support in a vise with the piston rod pulled out.


b.
B238472E03
1.792,1.26 1.979,1.458 0.188,0.198 10 false A 2.969,1.26 3.156,1.458 0.188,0.198 10 false B

Wear safety glasses. Gradually cut any area between A and B shown in the illustration using a metal saw to release the gas.

Standard:
Area Measurement
A - B 50 mm (1.97 in.)


CAUTION:

Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.