Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM1440E _59 Vehicle Exterior _056168 DOOR / HATCH _0274176 HOOD SUPPORT A

DOOR / HATCH  HOOD SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 53450A 1.REMOVE HOOD SUPPORT ASSEMBLY LH

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing the vehicle.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

In order to prevent the piston rod from deforming, do not apply any horizontal load to the door stay.



a.
B237109E02
3.01,0.688 2.948,0.688 2.948,0.688 2.865,0.833 false 3.031,0.646 3.271,0.865 0.24,0.219 10 false *1

Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the hood support.

Text in Illustration
*1 Protective Tape

NOTICE:

Remove the hood support assembly while supporting the hood panel with one hand.


HINT:

Tape the screwdriver tip before use.



Hide 53482 2.REMOVE HOOD SUPPORT BRACKET LH

a.
B237110

Remove the 2 bolts and hood support bracket.