Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM1440E _59 Vehicle Exterior _056168 DOOR / HATCH _0274182 BACK DOOR SUPPORT N

DOOR / HATCH  BACK DOOR SUPPORT  DISPOSAL  


PROCEDURE

Hide 68908 1.DISPOSE OF BACK DOOR DAMPER STAY SUB-ASSEMBLY LH

a.

Secure the back door damper stay sub-assembly horizontally in a vise with the piston rod pulled out.


b.
B246353E01
1.802,1.227 1.942,1.399 0.140,0.172 10 A 2.561,1.227 2.701,1.399 0.140,0.172 10 B 2.79,1.227 2.930,1.399 0.140,0.172 10 C

Wear safety glasses. Using a metal saw, slowly cut a groove between A and B shown in the illustration to release the gas.

Standard:
Area Measurement
A - B 100 mm (3.94 in.)
B - C 30 mm (1.18 in.)


CAUTION:

Although the gas inside the back door damper stay sub-assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back door damper stay sub-assembly with a piece of cloth or other material.