Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH
RM1440E _59 Vehicle Exterior _056169 MIRROR (EXT) _0274185 OUTER MIRROR SWITCH G

MIRROR (EXT)  OUTER MIRROR SWITCH  INSPECTION  


PROCEDURE

Hide 84870A 1.INSPECT OUTER MIRROR SWITCH ASSEMBLY

B225192E06
2.198,3.573 2.792,3.927 true 2.052,3.573 2.323,3.927 true 1.917,3.563 1.958,3.927 true 1.75,3.573 1.708,3.938 true 1.604,3.573 1.375,3.917 true 1.438,3.563 1.083,3.917 true 1.302,3.563 0.781,3.917 true 0.625,3.927 0.74,4.104 0.115,0.177 10 false B 0.958,3.938 1.104,4.115 0.146,0.177 10 false E 1.219,3.948 1.458,4.125 0.24,0.177 10 false M+ 1.521,3.958 1.875,4.125 0.354,0.167 10 false MLH 0.156,2.281 0.417,2.427 0.26,0.146 10 false *a 1.896,3.958 2.229,4.146 0.333,0.188 10 false MLV 2.281,3.958 2.656,4.135 0.375,0.177 10 false MRV 2.76,3.948 3.167,4.156 0.406,0.208 10 false MRH

a.

Inspect the outer mirror switch assembly.

i.

Select "L" on the left/right adjustment switch.


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
4 (MLV) - 8 (B)
6 (M+) - 7 (E)
UP Pressed Below 1 Ω
Not pressed 10 kΩ or higher
4 (MLV) - 7 (E)
6 (M+) - 8 (B)
DOWN Pressed Below 1 Ω
Not pressed 10 kΩ or higher
5 (MLH) - 8 (B)
6 (M+) - 7 (E)
LEFT Pressed Below 1 Ω
Not pressed 10 kΩ or higher
5 (MLH) - 7 (E)
6 (M+) - 8 (B)
RIGHT Pressed Below 1 Ω
Not pressed 10 kΩ or higher


If the result is not as specified, replace the outer mirror switch assembly.


iii.

Select "R" on the left/right adjustment switch.


iv.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (MRV) - 8 (B)
6 (M+) - 7 (E)
UP Pressed Below 1 Ω
Not pressed 10 kΩ or higher
3 (MRV) - 7 (E)
6 (M+) - 8 (B)
DOWN Pressed Below 1 Ω
Not pressed 10 kΩ or higher
2 (MRH) - 8 (B)
6 (M+) - 7 (E)
LEFT Pressed Below 1 Ω
Not pressed 10 kΩ or higher
2 (MRH) - 7 (E)
6 (M+) - 8 (B)
RIGHT Pressed Below 1 Ω
Not pressed 10 kΩ or higher


If the result is not as specified, replace the outer mirror switch assembly.

Text in Illustration
*a Component without harness connected
(Outer Mirror Switch Assembly)