87961
1.REMOVE OUTER MIRROR LH
Put protective tape around the outer mirror LH.
| *1 | Moulding Remover |
| *2 | Protective Tape |
Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
| *1 | Moulding Remover |
| *2 | Protective Tape |
Disconnect the connector to remove the outer mirror LH.
87948
2.REMOVE OUTER MIRROR HOLE COVER LH
Detach the 5 claws to remove the outer mirror hole cover LH.
87945
3.REMOVE OUTER MIRROR COVER LH
Detach the 7 claws to remove the outer mirror cover LH.
81740
4.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light)
81880G
5.REMOVE OUTER MIRROR LIGHT ASSEMBLY BULB (w/ Side Turn Signal Light)
Remove the outer mirror light assembly bulb.